Bienvenido a El Changarro! Encuentra nuevos productos y ofertas todos los días - El Salvador
Radio Cloning Data Cable Replacement and Compatible with ICOM IC-R2/R3 / A3/A4/A5/A6 / H2
$0.00
Descripción del producto
The instructions for cloning certain Icom radios using the OPC474 Cloning Cable, the information has been gleaned from the Icom documentation.
Where used below, MASTER is the radio that has the programmed data, SLAVE will be copied from the MASTER and any programming already stored on the SLAVE will be over-written.
To CLONE programmed data between radios the model and type must be the same
i.e. a 450 - 490 MHz 2 channel radio can program another 450 - 490 MHz 2 channel radio but cannot program a 400 - 430 MHz radio or a radio with more/fewer channels etc.
IMPORTANT NOTES:
Cloning between CPU revision 1.* and CPU revision 2 is not possible. To check CPU revision;
While pushing [P3] and [
] turn the transceiver power on. CPU revision is displayed ("t" is displayed at the end of the revision number for Thailand versions). The "Transceiver Data Out" must be checked for the MASTER transceiver (within CS-F3G). Otherwise the cloning between transceivers cannot be operated.
Cloning
- Remove antenna from both radios (received signals may cause cloning errors).
- Connect the OPC-474 CLONING CABLE to the speaker jack of the master and slave transceivers.
- While pushing [P0] and [] turn the MASTER transceiver power on to enter cloning mode.
- Repeat step (1) for the SLAVE transceiver.
"CLONE" appears and the transceivers enter the clone standby condition. - Push [PTT] on the MASTER transceiver to send data to the SLAVE.
"CLOUT" appears in the MASTER transceiver display.
"CL IN" appears automatically in the SLAVE transceiver display.
When cloning is finished, "CLONE" appears in the MASTER transceiver display.
NOTE:
DO NOT push the [PTT] on either transceiver during cloning. This will cause a cloning error. - When cloning is finished turn power for both radios off and remove the connecting cables. When powered on again the radios will return to normal operation.
Costo del envío $1.99 a cualquier parte de El Salvador. Este costo aplica por envío no importa cuantos artículos tenga tu orden.
Tiempo de procesamiento de tu orden: Procesamos tu orden en las 24 horas siguientes de la confirmación de tu pedido.
Tiempo de entrega zona metropolitana: 48 horas posteriores a la confirmación de tu pedido.
Tiempo de entrega resto del país: de 72 a 96 horas posteriores a la confirmación de tu pedido, dependiendo lo lejano de la entrega.
Cuando realiza un pedido desde www.elchangarro.com.sv recibirá un correo electrónico de confirmación. Una vez que se envía su pedido, se le enviará por correo electrónico la información de seguimiento para el envío de su pedido.