Curso de certificación en detección de Intrusión con fibra óptica

It is addressed to all distributors who install alarms and perimeter protection projects
Objective:

At the end of the course you will have the ability to design and implement the correct installation of FIBER SENSYS equipment

Content:

Introduction
 
Description of Fiber SenSys
Alarm Processing Unit (APU) Introduction - FD322, FD33X, FD34X, FD348, FD525, FD600, SecurLAN®, SenSysMat ™
Software Overview - SpectraView ™, AutoTune ™, Fiber Commander ™,
Tools, equipment, etc. - cable and conduit, installation tools, connectors and installation kit, Hardware for sliding doors.
 
Project planning
 
Feasibility study
Physical Site Evaluation
System Design and purpose
 
Project execution
 
Site Preparation
System Installation
System configuration and commissioning
Site certification
 
Project Monitoring
 
Regular tests and maintenance
System Repair
 
Theory of Operation of the APU
 
Basic Fiber Optic Concepts
Signal processing in the APU
Parameters of the APU, adjustment and basic control of Terminal Mode
 
Sensor installation
 
Application criteria - Mesh, buried, folding / sliding doors / gates and other types of zones; Levels of Security
Installation techniques of the sensor cable and the APU
Cable Connectorization
 
Sensor Test
 
Simulation of an Intrusion
Overview of the calibration, comparison and use software for: Spectraview ™, AutoTune ™
Specific intrusion setting: scaling, cutting, or various intrusion events
 
System maintenance
 
Visual inspection
Performance test
 
Alarm Output and APU Monitoring / Control Strategies Control Strategies
 
Only Relay Output
Monitoring and control via TCP / IP using Fiber Commander ™