CADEX C8000 Sistema de prueba de baterías de 4 canales con fuente de alimentación interna de 400 W

Features:

Digital technology widens the test range, provides ultimate stability and gets more power into a compact housing than is possible with analog devices. Each channel can be programmed with up to 10A charge and discharge current each. Power handling is 100W per channel on charge and 80W on discharge, or 400W on charge and 320W on discharge on all four channels.

The Cadex C8000 is more than a programmable power supply and load bank; the instrument has the intelligence to assist in safe battery testing. Protected charge and discharge algorithms with redundant safety features identify a faulty battery and safely terminate the service should an anomaly occur. The system can be overridden for destructive tests.

SEPARATE BATTERY AND I/O PORTS

Each channel features a Battery Port and I/O Port for individual programming. The system includes:

• Positive/negative input; 4-wire Kelvin
• Analog thermistor input
• 4 differential analog voltage inputs
• 2 analog outputs
• 4 input/output control for switching
• SMBus, clock, data for smart packs

LABORATORY SYSTEM

Use the C8000 as a command center to control these accessories:

• Thermal chamber *
• Digital load bank
• Heating element
• Pressure gauge
• Cell monitoring
• Safety circuit
• Alarms **

* See Specifications for listing

** With PC-BatteryLab™ and Custom programs

MONITORING INDIVIDUAL CELLS

Four differential (floating) analog inputs enable voltage check of up to 5 cells; 4 direct and one by voltage extraction.

LOAD CAPTURE

With the Load Capture Unit, the Cadex C8000 takes load signatures and plays them back as a simulated load protocol to check battery runtime in the lab. Check the battery runtime with different load demands and battery types. The C8000 goes to 10A; an external load bank brings this up to 240A.

EXTERNAL LOAD BANK

For higher load currents on discharge, you can connect the C8000 to a designated external load bank, enabling loads of up to 2,400 watts and 48 volts. (Supported on one channel only).

See Specifications for listing

DUAL POWER PORT CABLE

The Dual Power Port Cable ties two channels together to double the current from 10A to up to 20A. Applicable to discharge only.

SMART BATTERY TESTING

The Cadex C8000 reads register settings of SMBus batteries to verify function and identify anomalies.

• Assists in the design of smart batteries
• Checks cell voltages to verify proper function
• Reads Full Charge Capacity (FCC)

LOAD TEST

The Cadex C8000 allows testing batteries under GSM, CDMA or other discharge protocols. Programming is in 50μs intervals and the minimum setting is 500μs.

Runtime discharges a battery under three load conditions. You can set time duration and load levels. The cycle repeats itself until the capacity drops to the target setting. PC-BatteryLab™ provides charts and stores the results.

LIFECYCLE TEST

The program verifies battery endurance by counting the cycles until the capacity drops to the target capacity. This helps to select a battery and do incoming inspections to ensure consistent quality. The program is fully automated; PC-BatteryLab™ displays and stores the test.

CADEX C8000 4 desktop or rack mount battery test system with an internal 400 W power supply, 100-240 VAC. Includes C8000 base unit, and BatteryLab PC software on CD-ROM, 4 ea. 1.8 m (6') power port cables, 4 ea. 1.8 m (6') auxiliary data cables, one 3 m (10 ft)  Ethernet cable, 1 ea. dual port cable (DPPC), AC power cords, 1 set rack mount brackets, 1 ea- QuickStart User Guide, User´s Guide. RoHS compliant.

Includes North America, Europe, and UK AC cords.