Sistema para Comunicación de Emergencia con Radio TK8302HK (UHF 450-520 MHz).

The EMERTEL emergency communication system was created to be able to send a radio alert to the monitoring center in highly demanding areas, such as highways, park edges or any other strategic point where there is no other common means of communication.

Once the system is implemented correctly, the user in emergency may request support under the following procedure:

1. The user presses a button to alert the base.
2. The operator inside the base will communicate through the integrated horn to request information about the problem.
3. The user will wait for the operator to finish speaking and pressing the (PTT) button will briefly comment on the problem (only one person can speak at a time). At the end of the dialogue, the user must stop pressing the button. The operator responds.
4. The conversation may have several dialogues until the problem is understood.
5. The operator instructs the user to fix the problem. In such a case, the operator may send road, medical or other support to the user in question.

The EMERTEL system includes:

- Booth type post cabinet with light, microphone, speaker and PTT to start the audio.
- Pole mount top cabinet for backup battery storage, charge regulator, radio (TK8302HK), discharge protector and connection accessories (all included).
- Solar energy system based on a cell with assembly with its control elements.
- Strobe for visual alert.
- Yagui type radio antenna.
- Interconnection wiring for all elements.

** The equipment is fully functional before shipment **

Considerations: 

The duration of the backup may vary depending on the duration of the dialogue and the weather conditions.
Pole or tower is not included for integration.
The scope of the system will depend on the obstruction conditions and the type of equipment installed on the base.
The type of radio to use can change according to the client's requirements.
The TK8302HK radio has a frequency range of 450-520 MHz UHF.
The user must provide us with the frequencies to previously configure the equipment.